The processor modules of the M1 automation system stand out on account of their optimum performance and unrivalled robustness. Integrated into Bachmann CPU boards and I/O systems, industrial Pentium processors in an embedded design ensure absolute deterministic real-time behavior.

Even the most rigorous demands in terms of flexible data exchange and networking can be met without costly additional modules: M1 processor modules offer the full range of interfaces already »on-board«. This offers the automation engineer total freedom and ensures cost efficient and compact design. Ample power reserves for networking and communication-intensive applications are provided as basic features. The mass storage of the device is also fully scalable. As Programmable Automation Controllers (PAC), M1 CPUs combine flexibility, open standards and the performance of the PC / IT-world with the industrial robustness of classical PLC.

The comprehensive scope of Bachmann electronic software enables it to be used as a PLC, motion controller or communication and data centre.

Consistent compatibility of the PACs application software protects the user's investments for future expansions. 

Fotolia_76822871_XXL_lichtpunkt_bearb

Processor modules

Product overview

MX200- Serie 
(Compact)
MC200- Serie 
(Advanced)
MH200- Serie 
(High Performance)
  • Industrial Processor at up to 433 MHz
  • Priority scheduled Multitasking
  • 256 MB RAM
  • 512 kB remanent memory (Retain)
  • 64 MB internal memory device 1)
  • CompactFlash card slot for removable media
  • Front side PC-Card slot
  • 2x Ethernet 10/100 Mbit/s
  • 1x RS232, 1x RS232/RS422/RS485, 1x USB 2.0
  • CAN/CANopen
  • Integrated power supply for I/Os

1) Hardware revision ≤KR15x.000: 16 MB internal memory device on MX213 and MX220

  • Industrial Processor at up to 1.6 GHz
  • Single- / Dual- / Quad-Core
  • Realtime Symmetrical Multi Processing
  • Up to 2 GB DDR4 RAM
  • Up to 1 MB remanent memory (Retain)
  • Up to 4 GB internal memory device
  • CFast card slot for removable media
  • Up to 3x Ethernet 10/100/1000 Mbit/s with IEEE 1588
  • 1x RS232, 1x RS232/RS422/RS485, 1x USB 3.0
  • Trusted Platform Module
  • Industrial 2.3 GHz Dual-Core-Processor
  • 4 logical Cores via Hyper-Threading
  • Realtime Symmetrical Multi Processing
  • 2 GB DDR4 RAM
  • 1 MB remanent memory (Retain) 1)
  • 2 GB internal memory device 1)
  • CFast card slot for removable media
  • 2x Ethernet 10/100/1000 Mbit/s with IEEE 1588
  • 1x RS232, 1x RS232/RS422/RS485, 1x USB 3.0 1)
  • Trusted Platform Module 1)
  • Integrated power supply for I/Os

1) Hardware revision <KR110.000: 512 kB NVRAM, 16 MB internal memory device, USB 2.0 (incl. 500 mA supply), 30 W for I/O, no TPM-Chip, minimum version M-Base 4.30

System overview

Loading...