SIO142
Safety Digital Input/Output Module
Combined safety I/O module with 8 safe digital inputs and 4 safe digital outputs for safety applications with a low I/O count. Communication with the safety controller is provided via FSoE.
The inputs achieve SIL 2 / PL d (Category 3) in singlechannel operation and SIL 3 / PL e (Category 4) when used in pairs. Equivalence and antivalence monitoring is performed directly within the module. Configurable digital input filters adapt signal acquisition to the connected sensors. Configurable test pulses on the inputs and OSSD test pulses on the outputs enable the detection of wiring errors such as cross faults, short circuits, and external voltages. The sensor supply provides up to 600 mA per channel, while voltage and current are measured by the module.
Features
- Inputs
- 8 inputs, SIL 2 / PL d (Cat. 3) in single-channel operation; SIL 3 / PL e (Cat. 4) when used in pairs
- Singe-wire connection technology
- Test pulses configurable from 100 µs to 500 ms
- Sensor supply up to 600 mA per channel
- Measurement of voltage and current of the sensor supply
- Safety-rated signal preprocessing: equivalence, antivalence
- Configurable digital input filters
- Pulse extension
- Outputs
- 4 outputs up to SIL 3 / PL e / Cat. 4
- 2 A output current per channel
- Configurable OSSD test pulses
- Short-circuit and overload protection
- FSoE fieldbus connection

